|Processes||Lead Time||Tolerance||Price||Applications||Alloys||Finishing Options|
|As fast as 3 days||With drawing: as low as +/- 0.005 mm|
No drawing: ISO 2768 medium
|$$||Light & economic, used from prototyping to production||6061-T6, 7075-T6, 7050, 2024, 5052, 6063, MIC6||Alodine, Anodizing Types II, III, III + PTFE, ENP, Media Blasting, Nickel Plating, Powder Coating, Tumble Polishing.|
Aluminum is one of the most commonly used metals in the world because of its excellent strength-to-weight ratio, low cost, and recyclability. Fictiv offers multiple aluminum alloys.
Our standard alloy on platform is 6061, a versatile and easy-to-machine metal. It is corrosion-resistant, non-magnetic, and heat treatable.
7075 Aluminum is a hard, high strength alternative to 6061 Aluminum . It is often used for parts in high-stress applications, and is also corrosion-resistant, non-magnetic and heat treatable.
7050 Aluminum can be used instead of 7075 when high stress corrosion resistance is necessary (ie. bulkheads and fuselage frames). It is heat treatable and non-magnetic.
2024 Aluminum is not as strong as 7075 Aluminum but is commonly used when a high strength-to-weight ratio is required. It is heat treatable and non-magnetic.
5052 Aluminum is the easiest aluminum to weld and is exceptionally corrosion resistant against salt spray and salt water. It is easy to form, heat treatable, and non-magnetic.
6063 Aluminum is more corrosion resistant and formable than 6061 Aluminum. It is not ideal for high strength applications, but can be used for exterior railings and decorative trim. It is heat treatable and non-magnetic.
Also known as jig plate or cast tool, MIC6 is a cast aluminum alloy that is great for tight tolerance applications due to it being stress-relieved. It is most commonly used in precision machine tables and tooling. MIC6 is non-magnetic and not heat treatable.
Untreated aluminum generally has a dull silver/grey finish which varies depending on the roughness of the surface.
Many consumer products made with aluminum are anodized, most notably the MacBook Pro. Anodization allows the introduction of a variety of color options and adds a consistent shine across the entire part.
Aluminum can also be media-blasted, sanded, and hand-polished to achieve a multitude of surface finishes. Alodine is often used as an alternative protective coating to anodize on aluminum parts, and can be clear or gold in color.
Min Wall Thickness
Min End Mill Size
Min Drill Size
Max Part Size
Radii : Depth
0.8 mm (0.03 in)
0.5 mm (0.02 in)
1200 x 500 x 152 mm [x,y,z] (mill)
152 x 394 mm [d,h] (lathe)
Square profile, full radius, dovetail profiles
|Depth must not exceed 12x drill bit diameter.|
For end mills, depth must not exceed 10x tool diameter.
ABS plastic is a low-cost engineering plastic, widely used for pre-injection molding prototypes. CNC machined ABS is a great option for production-like parts, where detail and mechanical properties are important.
Depending on the desired outcome for the project, ABS plastic can either be cut or engraved using CNC milling.
ABS plastic is an excellent choice for general purpose prototyping, pre-molding prototypes, parts that will receive impact and require toughness, or when low cost is desired.
CNC (Computer Numerical Control) machining is an automated, subtractive manufacturing process where a CNC machine is controlled with a set of commands that, when followed, will produce a part. CNC operators create….
example dowel pin interference fit table